linux查看本机ip和端口号的命令是什么？

linux查看本机ip的命令是“ifconfig”命令和“ip address”命令；linux查看端口号的命令是“lsof -i:port”命令和“netstat -aptn”命令。

查看本机ip：

1）ifconfig命令

输出如下：

[root@topgun /home/cly]
# ifconfig
eth0: flags=4163  mtu 1500
        inet 192.168.128.132  netmask 255.255.255.0  broadcast 192.168.128.255
        inet6 fe80::20c:29ff:fe45:63ba  prefixlen 64  scopeid 0x20
        ether 00:0c:29:45:63:ba  txqueuelen 1000  (Ethernet)
        RX packets 1936  bytes 2440516 (2.3 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1207  bytes 94802 (92.5 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 19  base 0x2024  
lo: flags=73  mtu 16436
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10
        loop  txqueuelen 0  (Local Loopback)
        RX packets 12  bytes 744 (744.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 12  bytes 744 (744.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

该命令属于包：

[root@topgun /home/cly]
# pacman -Qo ifconfig
/sbin/ifconfig 属于 net-tools 1.60.20120804git-2

2）ip address命令

输出如下：

[root@topgun /home/cly]
# ip address
1: lo:  mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0:  mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:45:63:ba brd ff:ff:ff:ff:ff:ff
    inet 192.168.128.132/24 brd 192.168.128.255 scope global eth0
    inet6 fe80::20c:29ff:fe45:63ba/64 scope link 
       valid_lft forever preferred_lft forever

该命令属于包：

[root@topgun /home/cly]
# pacman -Qo ip
/usr/sbin/ip 属于 iproute2 3.5.1-1

Linux查看本机端口

查看指定的端口

sematic

一个开源的机器学习平台

下载

# lsof -i:port

查看所有端口

# netstat -aptn

安装telnet

#yum install -y telnet.x86_64

#telnet ip 端口

推荐教程： 《linux教程》